Lexmark Monochrome Laser 유지 관리 매뉴얼 - 페이지 3

{카테고리_이름} Lexmark Monochrome Laser에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark Monochrome Laser 10 페이지. Maintenance guide
Lexmark Monochrome Laser에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 사양 시트 (1 페이지), 보충 설명서 (5 페이지), 용지 걸림 제거 (2 페이지), 용지 걸림 지우기 매뉴얼 (2 페이지), 연결 매뉴얼 (19 페이지), 인쇄 매뉴얼 (17 페이지), 업데이트 (1 페이지), 연결 매뉴얼 (5 페이지), 정보 매뉴얼 (1 페이지), 빠른 참조 (1 페이지), 유지 관리 매뉴얼 (11 페이지), 설치 시트 (1 페이지)

Maintaining the printer

Periodically, certain tasks are required to maintain optimum print quality.

Make sure that the printer is turned off and unplugged from the wall outlet.

CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,

unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.

Remove all paper from the printer.

Dampen a clean, lint‑free cloth with water.

Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of

the printer.

Wipe only the outside of the printer.

Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.

Make sure all areas of the printer are dry before beginning a new print job.

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you

are ready to use them.

Do not expose supplies to:

•

Direct sunlight

•

Temperatures above 35°C (95°F)

•

High humidity above 80%

•

Salty air

•

Corrosive gases

•

Heavy dust

Note: The computer must be connected to the same network as the printer.

Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in

the TCP/IP section.

Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Maintaining the printer