KitchenAid KCMS1655BSS 설치 매뉴얼 - 페이지 4

{카테고리_이름} KitchenAid KCMS1655BSS에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KCMS1655BSS 12 페이지. Microwave oven built-in trim kit
KitchenAid KCMS1655BSS에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (16 페이지)

페이지 인쇄
KitchenAid KCMS1655BSS 설치 매뉴얼
3. Align the center arrows on the bottom duct with the centerline
drawn in Step 1 above.
A
A. Bottom duct
B. Center arrows, aligned with centerline
4. Mark the three mounting holes through the bottom duct onto
the cutout floor.
A
A. Short screws (3)
B. Bottom duct mounting holes
5. Using 7/64" drill, drill pilot holes into the three holes marked in
Step 4.
6. Realign and install the bottom duct with three short screws.
7. Using 7/64" drill, drill pilot holes through the four mounting
holes of the bottom duct flange into the bottom front facing of
the cutout/cabinet opening.
A
A. Bottom duct flange
B. Mounting holes
4
B
B
B

Install the Microwave Oven

1. Gently return microwave oven to its upright position.
2. Position microwave oven near cutout opening.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Plug in microwave oven.
4. Align the rails with the rail guides on the bottom duct.
A. Rail guides
B. Rails
A
B