Gardena Accu 60 사용 설명서 - 페이지 7
{카테고리_이름} Gardena Accu 60에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena Accu 60 12 페이지. Accu edging shears / accu shrub shears
Gardena Accu 60에 대해서도 마찬가지입니다: 사용 설명서 (11 페이지), 사용 설명서 (13 페이지)
페이지 인쇄
Cleaning the Accu Shears
and Oiling the Blades :
8. Troubleshooting
DANGER !
Risk of Injury !
Replacing the Cutting
Blades :
E
D
D
F
Changing the Accus :
J
16
To increase the cutting performance and operating life of your
Accu Shears, you should clean and oil them both before and
after every use.
1. Clean your Accu Shears with a damp cloth.
2. Oil the cutting blades with GARDENA Cleaning Spray
Art. No. 2366 or sewing machine oil, for example.
Blades can cause serious injury.
v v Do not push the safety lock of the Accu Shears
forwards when rectifying faults.
If the Accu Shears do not cut cleanly even after thorough cleaning,
the cutting blades are defective and must be replaced with new
ones.
E
Please only use original GARDENA Accu Shears Cutting
Blades .
Edging Shears blade set
Shrub Shears blade set
1. Remove the wheels (see 3. Assembly).
F
2. Press both catches
all the way forwards.
3. Open the runner
4. Clean the area around the gears and coat the gear wheels
with acid-free grease (Vaseline).
G
5. Insert the blade set
6. Push the runner
engage again.
Risk of short circuit, Risk of fire.
A
V The contacts of the accu must not touch metallic
parts.
I
1. Loosen screw
H
2. Remove cover
3. Remove accus.
4. Pull cable receptacles
5. Install new accus in reverse order.
Accu 60 / 80
Accu 100
Accu 80 / 100
E
simultaneously and push the runner
F
and remove the blade set
G
and close the runner
F
all the way back until both catches
H
.
I
.
J
off accu pack.
Art.-No. 2345
Art.-No. 2346
Art.-No. 5378
F
G
.
F
.
E