Avaya 6424D+M 기능 설명서 - 페이지 4

{카테고리_이름} Avaya 6424D+M에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 6424D+M 4 페이지. Using the new abbreviated dialing program feature
Avaya 6424D+M에 대해서도 마찬가지입니다: 빠른 참조 카드 (6 페이지)

페이지 인쇄

1. Programming Abbreviated Dialing Button on Softkeys

NOTE: If you do not see this message once you have entered Programming mode,

your telephone is probably NOT connected to a Release 6.3 switch. For help,

contact your system manager.

2. Select the hardkey (feature button) you want to program. (To do this, press

the button.)

3. You will see the message Enter number: on the display. Enter the number

you want that button to call. See the "Helpful Hints" section below for

information on the numbers you can enter.

When you have finished entering the number, press the "

You will hear the confirmation tone (three beeps), and you will see the

message Number Saved for one second and then the message Press but-

ton to program.

If you want to program another button, go back to Step 2; otherwise,

continue with Step 4.

NOTE: When you have changed the number called by a hardkey, you may

want to change its label on the paper strip too.

4. To exit from Programming mode, hang up your telephone. (To do this, press

the Speaker button, or lift the handset and then put it back.)

NOTE: Pressing the Exit button does not exit you from Programming mode.

Helpful Hints

•

If the number you are entering for an Abbreviated Dialing button is an out-

side number, be sure to include any applicable trunk codes, for example,

a "9."

•

Numbers programmed on softkeys may be up to 24 digits in length;

numbers programmed on hardkeys (feature buttons) may be up to

16 digits if the hardkey will be used as an auto-dial button or up to

24 digits if associated with a list. If you need help. see your system

manager.

•

Special functions such as Pause, Mark, and Wait, may be available on

your softkey menu; if so, they can be inserted in the numbers you

program. These functions may be accessed during programming by

pressing the Menu button.

•

You can enter feature access codes on Abbreviated Dialing buttons

instead of telephone numbers so that the button initiates a feature rather

than placing a call.

Prepared by

BCS Product Publications

Middletown, NJ 07748-1998

Lucent Technologies

Printed in USA

" key.