Gardena C 1030 plus 사용 설명서 - 페이지 9

{카테고리_이름} Gardena C 1030 plus에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena C 1030 plus 15 페이지. Water computer
Gardena C 1030 plus에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지)

페이지 인쇄

Exit soil moisture sensor-

controlled watering again :

Read / modify

watering programmes :

Manual operation :

Emergency programme : If no sensor is inserted in sensor-con-

trolled watering mode or if the connection cable is faulty, watering

will take place every 24 hours. The watering duration depends on

the run time but is limited to a maximum of 30 minutes.

v Hold the Menu button down for 5 seconds.

The normal display appears on the screen again.

If a value in the programme is to be changed, this can be

changed without changing the other values in the programme.

1. Press the Menu key twice.

Start Prog and the hours flash on the display.

2. Press the Menu button to jump to the next programme level

– or –

change the programme data with the ▼-▲ button and confirm

by pressing the OK button.

When the watering duration is changed while a program is

running, the current watering cycle is ended.

The valve can be opened or closed manually at any time.

A program-controlled open valve can also be closed early

without changing the program data (watering start time,

watering duration and watering frequency).

The controller must be fitted.

1. Press Man.-key to open the valve manually

(or to close an open valve).

Run Time and the watering time in minutes (set to

in the works) flash for 10 seconds on the display.

2. Whilst the watering time in minutes is flashing, the watering

duration can be modified with the ▼-▲ button (between

0 : 00

0 : 59

and

) (example:

OK-key.

3. Press Man.-key to close the valve early.

The valve is closed.

The amended manual opening period is stored, i.e. each time

the valve is opened manually in future the modified opening

period is preset. If the manual opening period is amended to

0 : 00

, the valve is closed and also remains closed after the

Man.-key is pressed (child lock).

If the valve has been opened manually and a programmed start

of a watering period overlaps the manual opening period, the

programmed starting time is suppressed.

Example :

The valve is opened at 9.00 a.m. manually, the opening period is

30 minutes. A program with a start time (START) between 9.00

and 9.30 a.m. will not be undertaken in this case.

minutes) and confirm with the

minutes