Lexmark MS410 series 빠른 참조 - 페이지 9
{카테고리_이름} Lexmark MS410 series에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS410 series 13 페이지. Ms410 series monochrome laser printer
Lexmark MS410 series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 설정 시트 (2 페이지), 사양 (2 페이지), 서비스 매뉴얼 (14 페이지)
페이지 인쇄3
Lift the green handle, and then pull the imaging unit out of the
printer.
Warning—Potential Damage: Do not touch the photoconductor
drum. Doing so may affect the print quality of future print jobs.
4
Place the imaging unit aside on a flat, smooth surface.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light can cause print quality problems.
5
Lift the green flap in front of the printer.
6
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
9
7
Insert the imaging unit by aligning the arrows on the side rails of
the unit with the arrows on the side rails inside the printer, and
then insert the imaging unit into the printer.
8
Insert the toner cartridge by aligning the side rails of the cartridge
with the arrows on the side rails inside the printer, and then insert
the cartridge into the printer.
9
Close the front door.
10
From the printer control panel, press
and continue printing.
to clear the message