Lexmark MS510 Series 빠른 참조 - 페이지 15

{카테고리_이름} Lexmark MS510 Series에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS510 Series 17 페이지. Machine type 4514-630, 4514-635, 4514-636
Lexmark MS510 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 이동 매뉴얼 (2 페이지), 매뉴얼 (20 페이지), 연결 매뉴얼 (6 페이지), 인쇄 매뉴얼 (5 페이지), 빠른 참조 (18 페이지), 종이 매뉴얼 (4 페이지), 정보 매뉴얼 (1 페이지), 설정 시트 (2 페이지), 사양 (2 페이지), 서비스 매뉴얼 (18 페이지)

페이지 인쇄
Lexmark MS510 Series 빠른 참조
4
Insert the tray.
5
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
[x]‑page jam, open tray [x]. [24y.xx]
1
Pull the tray completely out of the printer.
Note: The message on the printer display indicates the tray
where the jammed paper is located.
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
to clear the message
.
3
Insert the tray.
4
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
1
to clear the message
> Clear the jam, press OK >
.
15
[x]‑page jam, clear manual
feeder. [25y.xx]
1
From the multipurpose feeder, firmly grasp the jammed paper on
each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2
Flex the sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges on
a level surface.
3
Reload paper into the multipurpose feeder.
Note: Make sure the paper guide lightly rests against the edge of
the paper.