Avaya 9640 Series 최종 사용자 설명서 - 페이지 9
{카테고리_이름} Avaya 9640 Series에 대한 최종 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 9640 Series 18 페이지. Ip office telephone
Avaya 9640 Series에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 매뉴얼 (5 페이지)
페이지 인쇄
You are connected to the incoming call.
o
To make an outgoing call on a bridged line:
Note: When you make a call on a bridged line, you are using another person's line. The caller ID may show the call as coming
from you or coming from the person whose line you are using. If you have any questions about how the name or extension
displays to the person you are calling, contact your system administrator.
1. Select the bridged line you want to use.
2. Press OK.
3. Dial the telephone number, or call the person from the Contacts list, or call the person from the Call Log list.
The outgoing call is placed.
o
To join a call on a bridged line:
1. Select the line associated with bridged call in progress that you want to join.
2. Press Bridge.
You are connected to the call.
o
To add a person on hold to a conference call:
1. From the Phone screen, select your active call.
2. Press Conf.
3. Select the call on hold that you want to add to the conference.
4. Press Resume to take the call off hold.
5. Press Join to add the person to the conference call.
Note: Depending on how your telephone is administered, you may not have to press Join to add the person to the
conference call.
The new person is added to the active call.
o
To set up a conference call:
1. From the Phone screen, select your active call.
2. Press Conf.
3. Dial the telephone number, or call the person from the Contacts list, or call the person from the Call Log list.
4. Press Join to add the person to the existing call.
The new person is added to the active call.
o
To drop the last person added to conference call:
1. From the Phone screen, select your active call.
2. Press Drop.
The last person added to the conference call is dropped.
o
To drop a person from a conference call:
Note: This feature is not available on all systems. If you do not see Drop when you choose a person, you cannot drop that
person.
1. From the Phone screen, select your active call.
2. Press More then Details.
3. Select the person you want to drop.
4. Press Drop.
The selected person is dropped from the conference call.
o
To put a conference call on hold:
1. While you are on the conference call, press Hold.
The conference call is put on hold.
o
The other parties can still talk to each other.
o
2. Press Resume or OK to resume the conference call.
To retrieve a conference call from hold:
1. Press Resume or OK.
Conference
{dial tone}
9640 IP Telephone End User Guide | 9 |
P a g e