Lexmark MS531 빠른 참조 - 페이지 4

{카테고리_이름} Lexmark MS531에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS531 12 페이지.
Lexmark MS531에 대해서도 마찬가지입니다: 빠른 참조 (11 페이지)

Load the paper stack with the printable side faceup.

For one ‑ sided printing, load letterhead faceup with the

•

header toward the front of the tray.

For two ‑ sided printing, load letterhead facedown with the

•

header toward the back of the tray.

•

Do not slide paper into the tray.

•

Make sure that the stack height is below the maximum

paper ﬁll indicator. Overﬁlling may cause paper jams.

Insert the tray.

If necessary, set the paper size and type to match the paper

loaded in the tray.

Loading the manual feeder

Adjust the edge guides to match the width of the paper that

you are loading.

Note: Make sure that the guides ﬁt snugly against the paper,

but not too tight as to cause the paper to buckle.

Load a sheet of paper with the printable side facedown.

Note: Make sure that the paper is loaded straight to avoid

skewed or crooked print.

For one ‑ sided printing, load letterhead with the printable

•

side facedown and the top edge entering the printer ﬁrst.

For two ‑ sided printing, load letterhead with the printable

•

side faceup and the top edge entering the printer last.

•

Load envelope with the ﬂap side up and against the right

side of the paper guide.

Feed the paper until its leading edge gets pulled in.

Warning—Potential Damage: To avoid paper jams, do not

force paper into the manual feeder.

Note: The multipurpose feeder is available only if the optional

650-sheet duo tray is installed.