KitchenAid KHHC2090SBL 2.0 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} KitchenAid KHHC2090SBL 2.0에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KHHC2090SBL 2.0 12 페이지. Installation instructions

3. When the vent deflector is as far back as it can easily slide, flip

it so that the wide side is to the back of the microwave oven,

and the narrow side (with holes) is down. The vent deflector

holes should align with mounting holes in the vent opening, as

shown in inset.

A. Vent opening

B. Vent deflector

4. Secure vent deflector with 2 mounting screws (1 on each end).

A. Mounting screw

B. Vent deflector

5. Replace vent screen

Wall Venting Installation Only

To Remove Wall Damper Vent Cover:

1. Locate the wall damper vent cover on the back of the

microwave oven.

2. Using diagonal wire cutting pliers, gently snip out the damper

vent cover at the perforations.

A. Diagonal wire cutting pliers

B. Back of microwave oven

C. Wall damper vent cover

D. Perforations

3. Save the cover for possible change of venting method in the

future.

4. Position the damper assembly so that the long tab slides into

the slot on the right side of the damper vent opening, as

shown. Then secure with mounting screw.

A. Mounting screw

B. Damper assembly

C. Long tab (inside slot)

Roof Venting Installation Only

To Remove Roof Damper Vent Cover:

1. Locate the roof damper vent cover on the top of the