Lexmark MS610de 빠른 참조 - 페이지 9

{카테고리_이름} Lexmark MS610de에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS610de 17 페이지. Ms610 series monochrome laser printer
Lexmark MS610de에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 매뉴얼 (20 페이지), 빠른 참조 (18 페이지), 메뉴 맵 (4 페이지), 인쇄 매뉴얼 (4 페이지), 정보 매뉴얼 (1 페이지), 설정 시트 (2 페이지), 소모품 매뉴얼 (2 페이지), 사양 (2 페이지)

페이지 인쇄
Lexmark MS610de 빠른 참조
3
Squeeze and then slide the length guide tab to the correct position
for the size of the paper you are loading.
Notes:
•
For some paper sizes like letter, legal, and A4, squeeze and
slide the length guide tab backward to accommodate their
length.
•
When loading legal‑size paper, the length guide extends
beyond the base leaving the paper exposed to dust. To
protect the paper from dust, you can purchase a dust cover
separately. For more information, contact customer support.
•
If you are loading A6-size paper in the standard tray, then
squeeze and then slide the length guide tab toward the
center of the tray to the A6‑size position.
•
Make sure the width and length guides are aligned with the
paper size indicators on the bottom of the tray.
1
2
4
Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
9
5
Load the paper stack.
Notes:
•
Load with the printable side facedown when using recycled
or preprinted paper.
•
Load prepunched paper with the holes on the top edge
toward the front of the tray.
•
Load letterhead facedown, with the top edge of the sheet
toward the front of the tray. For two‑sided printing, load
letterhead faceup with the bottom edge of the sheet toward
the front of the tray.
•
Make sure the paper is below the maximum paper fill
indicator located on the side of the width guide.