KitchenAid KHHC2090SSS - Architect II 2.0 cu. ft. 1200 W 설치 지침 매뉴얼 - 페이지 5
{카테고리_이름} KitchenAid KHHC2090SSS - Architect II 2.0 cu. ft. 1200 W에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KHHC2090SSS - Architect II 2.0 cu. ft. 1200 W 12 페이지. Installation guide
KitchenAid KHHC2090SSS - Architect II 2.0 cu. ft. 1200 W에 대해서도 마찬가지입니다: 사용자 지침 (9 페이지), 데이터시트 (1 페이지)
페이지 인쇄
Wall Venting Installation Only
To Remove Wall Damper Vent Cover:
1. Locate the wall damper vent cover on the back of the
microwave oven.
2. Using diagonal wire cutting pliers, gently snip out the damper
vent cover at the perforations.
A
B
C
A. Diagonal wire cutting pliers
B. Back of microwave oven
C. Wall damper vent cover
D. Perforations
3. Save the cover for possible change of venting method in the
future.
4. Position the damper assembly so that the long tab slides into
the slot on the right side of the damper vent opening, as
shown. Then secure with mounting screw.
A
B
A. Mounting screw
B. Damper assembly
C. Long tab (inside slot)
D
C
Roof Venting Installation Only
To Remove Roof Damper Vent Cover:
1. Locate the roof damper vent cover on the top of the
microwave oven.
2. Using diagonal wire cutting pliers, gently snip out the damper
vent cover at the perforations.
A
D
A. Diagonal wire cutting pliers
B. Top of microwave oven
C. Roof damper vent cover
D. Perforations
3. Save the cover for possible change of venting method in the
future.
NOTE: Do not install damper assembly at this time.
B
C
5