Avaya BCM50 기술 구성 매뉴얼 - 페이지 12
{카테고리_이름} Avaya BCM50에 대한 기술 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya BCM50 18 페이지. Business communication manager for skype sip connect service
Avaya BCM50에 대해서도 마찬가지입니다: 구성 매뉴얼 (14 페이지)
페이지 인쇄
2.3 ERS 8600 – Used as Core Switch only
There is no edge configuration for Avaya Automatic QoS on the ERS 8600. Presently, when used as a
core switch for Avaya Automatic QoS with either the ERS 4500 or ERS 5000 as an edge switch, only
Avaya Automatic QoS mixed mode is supported on the edge switch
2.3.1 CLI Configuration – R Modules
When used as a core switch, the edge ERS 4500 or ERS 5000 uplinks ports to the ERS 8600 should be
configured as DiffServ core ports with 802.1 p-bit over-ride enabled.
ERS-8610:5# config ethernet <slot/port> enable-diffserv true
ERS-8610:5# config ethernet <slot/port> 802.1p-override enable
2.3.2 CLI Configuration – Legacy Modules
ERS8600-4:5# config ethernet <slot/port> enable-diffserv true
ERS8600-4:5# config ethernet <slot/port> access-diffserv false (default setting)
2.4 ERS 8300 – Used as Core Switch only
Similar to the ERS 8600, there is no edge configuration for Avaya Automatic QoS on the ERS 8300, but it
can still be used as a core switch.
2.4.1 CLI Configuration
When used as a core switch, the edge ERS 4500 or ERS 5000 uplinks ports to the ERS 8300 should be
configured using ACL's to trust the DSCP values. Assuming no ACL or ACG's have been configured,
using ACL 1 and ACG 1, enter the following commands:
ERS8300-2:5# config filter acl 1 create ip acl-name "trust"
ERS8300-2:5# config filter acl 1 ace 1 action permit trust-dscp enable "trust" precedence 1
ERS8300-2:5# config filter acg 1 create 1 acg-name "acg_trust"
Finally, add the ACG 1 to the appropriate interfaces connected the edge ERS 4500 or ERS 5000 uplinks:
ERS8300-2:5# config ethernet <slot/port> filter create 1
Ethernet Routing Switch 4500, 5000, Avaya BCM 50, 450, Avaya CS 1000, Avaya CS 2100, Avaya SRG 50
avaya.com
11