Avaya BCM50 구성 매뉴얼 - 페이지 7
{카테고리_이름} Avaya BCM50에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya BCM50 14 페이지. Business communication manager for skype sip connect service
Avaya BCM50에 대해서도 마찬가지입니다: 기술 구성 매뉴얼 (18 페이지)
페이지 인쇄
5.0 System Configuration
This section provides procedures for configuring a SIP trunk on BCM Rls. 6.0 to Skype.
5.1 BCM Configuration
In order to configure a SIP trunk between BCM and
5.1.1 IP Trunks Settings Configuration
1. Navigate to
Configuration
2.
Click on the "IP Trunks Settings" tab
3. Ignore in-band DTMF in RTP: by clicking on the check box next to it.
5.1.2 SIP Media Parameters Configuration
1. Navigate to
Configuration
2.
Select the Media Parameters tab.
3. In the Preferred Codecs section, configure G.729, G.711-uLaw as the first and second
preferred codec respectively.
4. In the codec Settings section,
•
In the codec Settings section, select 20ms as the payload size for both G.729 and
G.711
•
FAX is not supported by Skype.
•
Provide in-band ringback must be left unchecked.
5.1.3 Importing Skype Template to BCM
1. Navigate to
Configuration
2. Select the Public tab.
3. Select the ITSP Templates tab
4. Click on the Import button
5. Select Yes to acknowledge the warning
6. An Import Files dialog box will open
7. Click on Browse and navigate to the directory containing the Skype templates
8. Select the Skype template and click on Select Files
9. Click the OK button to import the template to the BCM
NC; Reviewed:
10/01/2010
Resources
Resources
Resources
Avaya BCM Solutions Test Lab
Application Notes
©2010 Avaya Inc. All Rights
Reserved.
Skype, do the following:
IP Trunks
General
IP Trunks
SIP Trunking
IP Trunks
SIP Trunking
ConfiguringSIPTrunkingSkype-BCM6
7 of 14
Page 7 of 14