Avaya BM12 사용자 설명서 - 페이지 10

{카테고리_이름} Avaya BM12에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya BM12 15 페이지. Button module for one-x deskphone

Introduction to the BM12 Button Module

Personal Settings

Your button module has labels preset by your administrator. You can change these labels to

make them clearer or more useful to you. Be sure to use the appropriate procedure for the type

of deskphone model you have.

CAUTION:

You cannot use the button module itself to personalize or restore a label.

CAUTION:

Pressing the Edit button with the pencil symbol on the button module causes the

deskphone to display the Personalize Labels screen on the deskphone. You then

select the specific button module and call appearance or feature label you want

to personalize using the deskphone rather than the button module itself. When

multiple button modules are attached, the Personalize Labels screen displays

lines for Module 1, Module 2, and Module 3 (as applicable). Module 1 refers to

the button module connected directly to the deskphone; Module 2 corresponds to

the button module attached to Module 1, and Module 3 is the module attached to

Module 2.

Note:

If you try to change a label that is locked (cannot be changed, as set by your

Note:

system administrator), an error beep sounds and a message informing you that

label cannot be changed displays.

1. Press the button module's Edit button.

2. With the Phone screen displayed, use the deskphone's list of call appearances and features

to change a label. To change a call appearance label, press the button module line button

corresponding to the button module label you want to edit. To change a feature button or

abbreviated dial label, press the button module line button corresponding to the feature

label you want to edit.

3. Press Edit.

4. Edit the label using up to 13 characters.

If you want to clear the current label text first, press Clear then enter the new label.

5. Press Save or OK.

1. Press the button module's Edit button.

10 Avaya one-X™ Deskphone BM12 Button Module User Guide