Avaya DC-Net 4621 SW 빠른 설치 매뉴얼

{카테고리_이름} Avaya DC-Net 4621 SW에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya DC-Net 4621 SW 6 페이지. One-x quick edition
Avaya DC-Net 4621 SW에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지), 빠른 참조 (1 페이지), 빠른 참조 (1 페이지)

페이지 인쇄

Avaya one-X™ Quick Edition

Telephone Quick Installation Guide

Installing a 4610SW/4621SW IP Telephone

This document contains a summarized (four-step) installation procedure. For

detailed step-by-step procedures, including variants of this procedure, refer to the

Avaya one-X Quick Edition Telephone User Guide.

Unpack the equipment from the shipping box. The package should contain

the following items:

• one telephone set (includes a telephone stand),

• one Category 5 (Cat5) modular line cord, and

• this quick installation guide.

Power is typically supplied to the telephone by connecting the Cat5

modular line cord to a 802.3af PoE-enabled Ethernet LAN. Option A on

the facing page shows a wall jack, but you could connect the Cat5 modular

line cord directly to a PoE-enabled Ethernet switch. If your Ethernet

network does not provide 802.3af-compliant inline power, you must supply

a PoE inline power supply (see Option B on next page). The last step in

installing your telephone must be applying power.

You may optionally connect the telephone between a computer and the

Ethernet LAN—the telephone and the computer share the connection. In

this case, you must supply a second Cat5 (or better) modular line cord to

connect the telephone to the computer. For installation instructions, see

''To share the telephone LAN connection with a

Connect the first telephone to the LAN

1. Plug one end of the supplied Cat5 modular line cord into the LAN

port on the telephone and connect the other end to the Ethernet

LAN.

2. When you are prompted to create a site, press 1 on the dialpad.

3. When you are prompted to enter a site name, press the keys on

the dialpad to enter the site name, and then select the Next

softkey. For example, to type "R", press the dialpad key "7" three

times. For more information about how to enter characters, see

''Entering Text and Special

4. When you are prompted to change the default password (wait for

the prompt), enter 54321, and then select the Next softkey.

5. Follow the prompts to enter and confirm a different password. The

password must contain at least five numbers in the 0 to 9 range.

6. When you are prompted for a name, use the keys on the dialpad to

enter a user name for the telephone extension (for example,

Smith, Pat), and then select the Save softkey.

March 2006

Revision: 1

computer''.

Characters''.

Connection Jacks - Option A, LAN is 802.3af PoE Enabled

optional

facultatif

optionale

opcional

16-600797