Lexmark MS710 Series 종이 매뉴얼

{카테고리_이름} Lexmark MS710 Series에 대한 종이 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS710 Series 4 페이지. Printing guide
Lexmark MS710 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 매뉴얼 (20 페이지), 연결 매뉴얼 (6 페이지), 이동 매뉴얼 (3 페이지), 소모품 매뉴얼 (3 페이지), 메뉴 맵 (2 페이지), 정보 매뉴얼 (1 페이지), 설정 시트 (2 페이지), 빠른 매뉴얼 (20 페이지), (그리스어) (17 페이지)

페이지 인쇄
Lexmark MS710 Series 종이 매뉴얼

Media Guide

The printer supports the following paper and specialty media sizes. Select custom sizes up to the maximum measurements
specified for the Universal setting.

Paper sizes supported by the printer

1
Paper size
A4
A5
A6
JIS B5
Letter
Legal
Executive
Oficio
Folio
Statement
2
Universal
1
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that
correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select
Universal or turn off tray size sensing. For more information, contact customer support.
2
To support two‑sided (duplex) printing, the Universal width must be between 105 mm (4.13 inches) and 216 mm (8.5 inches); the
Universal length must be between 148 mm (5.83 inches) and 356 mm (14 inches).
Dimensions
Standard or
optional 250‑ or
550‑sheet trays
210 x 297 mm
(8.3 x 11.7 in.)
148 x 210 mm
(5.8 x 8.3 in.)
105 x 148 mm
(4.1 x 5.8 in.)
182 x 257 mm
(7.2 x 10.1 in.)
216 x 279 mm
(8.5 x 11 in.)
216 x 356 mm
(8.5 x 14 in.)
184 x 267 mm
(7.3 x 10.5 in.)
216 x 340 mm
(8.5 x 13.4 in.)
216 x 330 mm
(8.5 x 13 in.)
140 x 216 mm
(5.5 x 8.5 in.)
105 x 148 mm to 216
x 356 mm (4.13 x
5.83 in. to 8.5 x 14 in.)
70 x 127 mm to
216 x 356 mm
(2.76 x 5 to 8.5 x 14 in.)
Optional
2100‑sheet tray
X
X
X
X
X
X
X
Media Guide
Page 1 of 4
Multipurpose
Duplex
feeder
X