Avaya Definity 6424 사용자 설명서 - 페이지 17

{카테고리_이름} Avaya Definity 6424에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya Definity 6424 17 페이지. 6400 series, multi-line voice terminal
Avaya Definity 6424에 대해서도 마찬가지입니다: 빠른 참조 카드 (6 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (2 페이지)

페이지 인쇄

2. To end the test, release Trnsfr. The lights return to normal operation.

Note: If the lights or the display segments do not respond during the test, see your system manager.

To view the elapsed time:

1. Press the Menu button and then the softkey below Timer (if available on your display). This exits you from

Softkey Mode.

or, Press Timer (if administered).

The display shows the elapsed time.

To stop the timer and clear the display:

1. Press the Menu button and then the softkey below Timer again (if available on your display).

or, Press Timer again.

The elapsed time is displayed for about three seconds and then disappears.

To send the present call to another number:

1. Press Trnsfr while on a call. The present call is put on hold. The green light blinks. You are given a new

call appearance button and dial tone.

2. Dial the number to which the call is to be transferred.

3. Remain on the line and announce the call. If the line is busy of there is no answer, return to the call on

hold by pressing its call appearance button.

4. Press Trnsfr again. The call is sent to the dialed number.

Note: If you hang up before pressing Trnsfr again, the caller will not be transferred. Press the

flashing line and start the transfer process again from step 1.

5. Hang up

Page 16

Timer

Transfer