Avaya Desk 사용자 설명서 - 페이지 7

{카테고리_이름} Avaya Desk에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya Desk 10 페이지. Single line business telephones desk, wall, and trimline models

To Install Your Wall Telephone

1. Align the wall phone plug with the jack, then line up the hole in the back

of the telephone set with the rivets on the wall outlet plate. Push in and

slide the telephone down into place

2. Plug one end of the coiled handset cord into the jack in the handset.

Push the plug in until it clicks.

3. Plug the other end of the cord into the jack in the bottom of the wall

base. Push the plug in until it clicks.

4. Adjust the ringer volume switch on the upper right side of the telephone

to the desired setting.

Place the number card on your telephone following the instructions on the

back of the number card label.

FIGURE 4 Wall Telephone Installation

1. To disconnect or remove your telephone reverse the installation

procedures. To remove any modular plug, squeeze the clip of the plug

and pull it out of the jack.

2. To disconnect a wall set, slide the set up to lift it off the rivets and pull it

away from the wall.

(Figure

4).