Lexmark MS810n 모노 품질 매뉴얼

{카테고리_이름} Lexmark MS810n에 대한 모노 품질 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS810n 1 페이지. Ms810 series monochrome laser printer
Lexmark MS810n에 대해서도 마찬가지입니다: 연결 매뉴얼 (6 페이지), 정보 매뉴얼 (1 페이지), 매뉴얼 (20 페이지), 이동 매뉴얼 (3 페이지), 종이 매뉴얼 (4 페이지), 메뉴 맵 (3 페이지), 설정 시트 (2 페이지), 인쇄 결함 매뉴얼 (1 페이지), 매뉴얼 (17 페이지), 인쇄 매뉴얼 (18 페이지), 제품 사양 (2 페이지), 제품 사양 (2 페이지)

페이지 인쇄
Lexmark MS810n 모노 품질 매뉴얼
Mono Quality Guide

Quality menu

Use
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both directions
Toner Darkness
1–10
Enhance Fine Lines
On
Off
Gray Correction
Auto
Off
Brightness
‑6 to 6
Contrast
0–5
To
Specify the printed output resolution in dots per inch.
Note: 600 dpi is the factory default setting.
Enable more pixels to print in clusters for clarity, in order to enhance images horizontally or
vertically, or to enhance fonts.
Note: Off is the factory default setting.
Lighten or darken the printed output.
Notes:
•
8 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
Enable a print mode preferable for files such as architectural drawings, maps, electrical circuit
diagrams, and flow charts.
Notes:
•
Off is the factory default setting.
•
To set this option using the Embedded Web Server, type the network printer IP address
in the Web browser address field.
Automatically adjust the contrast enhancement applied to images.
Note: Auto is the factory default setting.
Adjust the printed output either by lightening or darkening it. You can conserve toner by
lightening the output.
Note: 0 is the factory default setting.
Adjust the contrast of printed objects.
Note: 0 is the factory default setting.
Mono Quality Guide
Page 1 of 1