Makita 6043D 사용 설명서 - 페이지 8
{카테고리_이름} Makita 6043D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6043D 17 페이지. Makita model 6043d cordless drill instruction manual
Makita 6043D에 대해서도 마찬가지입니다: 부품 목록 (1 페이지)
페이지 인쇄
ASSEMBLY
1
3
1. Tighten
2. Sleeve
3. Ring
OPERATION
8
CAUTION:
•
Always be sure that the tool is switched off before
carrying out any work on the tool.
Installing or removing driver bit or drill bit
002112
Hold the ring and turn the sleeve counterclockwise to open
2
the chuck jaws. Place the bit in the chuck as far as it will go.
Hold the ring firmly and turn the sleeve clockwise to tighten
the chuck.
To remove the bit, hold the ring and turn the sleeve counter-
clockwise.
Screwdriving operation
Place the point of the driver bit in the screw head and apply
pressure to the tool. Start the tool slowly and then increase
the speed gradually. Release the trigger just as the screw
bottoms out. If the trigger is not released, the screw may strip
out the hole or the screw and/or bit may be damaged.
NOTE:
•
Make sure that the driver bit is inserted straight in the
screw head, or the screw and/or bit may be damaged.
•
When driving wood screws, predrill pilot holes to make
driving easier and to prevent splitting of the workpiece.
See the chart.
Nominal diameter of
wood screw (mm)
3.1 (1/8")
3.5 (9/64")
3.8 (5/32")
4.5 (11/64")
Recommended size
of pilot hole (mm)
2.0 - 2.2 (5/64" - 3/32")
2.2 - 2.5 (3/32" - 3/32")
2.5 - 2.8 (3/32" - 7/64")
2.9 - 3.2 (7/64" - 1/8")