Makita 6070DW 사용 설명서 - 페이지 7
{카테고리_이름} Makita 6070DW에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6070DW 16 페이지. Variable speed, reversible cordless driver drill
페이지 인쇄Installing or removing driver bit
CAUTION :
When installing or removing the bit, be careful not to touch the trigger switch.
To
install the bit, place it in the chuck as far as
it will go. Tighten the chuck by hand. Place
the chuck key in each of the three holes and
tighten clockwise.
Be sure to tighten all three chuck holes
evenly.
To remove the bit, turn the chuck key coun-
terclockwise in just one hole, then loosen the
chuck by hand.
1
Chuck key
Switch action
Tool speed is increased by increasing pres-
sure on the trigger. To start the tool, simply
pull the trigger. Release the trigger to stop.
7