Lexmark MS811 Series 매뉴얼 - 페이지 17

{카테고리_이름} Lexmark MS811 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS811 Series 20 페이지. Ms811/ms812 series monochrome laser printer
Lexmark MS811 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 연결 매뉴얼 (6 페이지), 인쇄 매뉴얼 (16 페이지), 종이 매뉴얼 (4 페이지), 메뉴 맵 (3 페이지), 이동 매뉴얼 (3 페이지), 소모품 매뉴얼 (3 페이지), 설정 시트 (2 페이지), 데이터시트 (2 페이지)

페이지 인쇄
Lexmark MS811 Series 매뉴얼
Action
Step 4
a
Enable Quiet mode.
From the printer control panel, navigate to:
Settings > General Settings > Quiet Mode > On
b
Resend the print job.
Does the toner rub off?

Toner specks appear on prints

Action
Replace the imaging unit, and then resend the print job.
Do toner specks appear on prints?

Transparency print quality is poor

Action
Step 1
From the printer control panel, set the paper type in the Paper menu to match
the paper loaded in the tray.
Is the paper type for the tray set to Transparency?
Step 2
a
Check if you are using a recommended type of transparency.
b
Resend the print job.
Is the print quality still poor?

Uneven print density

Print quality Guide
Page 17 of 19
Yes
No
Contact
customer
The problem is solved.
support.
Yes
No
Contact
customer
The problem is solved.
support.
Yes
No
Go to step 2.
Set the paper type to
Transparency.
Contact
customer
The problem is solved.
support.