Gardena 8808 사용 설명서 - 페이지 7

{카테고리_이름} Gardena 8808에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 8808 11 페이지. Edging accu shears /accu shrub shears

페이지 인쇄

8. Troubleshooting

WARNING !

Risk of Injury !

Replacing the Cutting

Blades :

Changing the Accus :

Blades can cause serious injury.

v v Do not push the safety lock of the Accu-shears forwards

when rectifying faults.

If the Accu Shears do not cut cleanly even after thorough cleaning,

the cutting blades are defective and must be replaced with new

ones.

Please only use original GARDENA Accu Shears Cutting

Blades :

Lawn shears blade set

with blade protection

Shrub shears blade set

with blade protection

1. Press both catches

all the way forwards.

2. Open the runner

3. Clean the area around the gears and coat the gear wheels with

acid-free grease (Vaseline).

4. Push connecting link (ring)

the lower blade

5. Insert the blade set

6. Push the runner

engage again.

If the sliding shoe

cam wheel

Risk of short circuit, Risk of fire.

v v The contacts of the accu must not touch metallic parts.

1. Loosen screw

2. Remove cover

3. Remove accus

4. Pull cable receptacles

5. Install new accus in reverse order.

With all other malfunctions, please contact one of the GARDENA

service centres or a dealer authorised by GARDENA.

Repairs must only be performed by specialists authorised by

GARDENA.

simultaneously and push the runner

and remove the blade set

into the middle (the hole around

must be visible).

and close the runner

all the way back until both catches

cannot be closed, check the position of the

and the connecting link

off accu pack.

Accu 45

Art. No. 2345

Accu 45

Art. No. 5378