Lexmark MS811 Series 인쇄 매뉴얼 - 페이지 14

{카테고리_이름} Lexmark MS811 Series에 대한 인쇄 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS811 Series 16 페이지. Ms811/ms812 series monochrome laser printer
Lexmark MS811 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 연결 매뉴얼 (6 페이지), 매뉴얼 (20 페이지), 종이 매뉴얼 (4 페이지), 메뉴 맵 (3 페이지), 이동 매뉴얼 (3 페이지), 소모품 매뉴얼 (3 페이지), 설정 시트 (2 페이지), 데이터시트 (2 페이지)

페이지 인쇄
Lexmark MS811 Series 인쇄 매뉴얼
4
Prepare the paper or specialty media for loading.
•
Flex sheets of paper back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level
surface.
•
Hold transparencies by the edges. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
•
Flex the stack of envelopes back and forth to loosen them. Straighten the edges on a level surface.
5
Load the paper or specialty media.
Note: Slide the stack gently into the multipurpose feeder until it comes to a stop.
•
Load only one size and type of paper or specialty media at a time.
•
Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
•
There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Printing Guide
Page 14 of 16