Lexmark MS811 Series 종이 매뉴얼 - 페이지 2

{카테고리_이름} Lexmark MS811 Series에 대한 종이 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS811 Series 4 페이지. Ms811/ms812 series monochrome laser printer
Lexmark MS811 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 연결 매뉴얼 (6 페이지), 매뉴얼 (20 페이지), 인쇄 매뉴얼 (16 페이지), 메뉴 맵 (3 페이지), 이동 매뉴얼 (3 페이지), 소모품 매뉴얼 (3 페이지), 설정 시트 (2 페이지), 데이터시트 (2 페이지)

페이지 인쇄
Lexmark MS811 Series 종이 매뉴얼
1
Paper size
10 Envelope
DL Envelope
C5 Envelope
B5 Envelope
Other Envelope
1
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that
correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select
Universal or turn off tray size sensing. For more information, contact customer support.
2
To support two‑sided (duplex) printing, the Universal width must be between 105 mm (4.13 inches) and 216 mm (8.5 inches); the
Universal length must be between 148 mm (5.83 inches) and 356 mm (14 inches).

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:
•
For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most label manufacturers
recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative humidity between 40 and 60%.
•
Store paper in cartons when possible, on a pallet or shelf, rather than on the floor.
•
Store individual packages on a flat surface.
•
Do not store anything on top of individual paper packages.

Avoiding jams

Load paper properly
•
Make sure paper lies flat in the tray.
Dimensions
Standard or
optional 250‑ or
550‑sheet trays
105 x 241 mm
(4.1 x 9.5 in.)
110 x 220 mm
(4.3 x 8.7 in.)
162 x 229 mm
(6.38 x 9.01 in.)
176 x 250 mm
(6.93 x 9.84 in.)
98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
Optional
Multipurpose
2100‑sheet tray
feeder
X
X
X
X
X
Media Guide
Page 2 of 4
Duplex
X
X
X
X
X