Makita 6093D 사용 설명서 - 페이지 7
{카테고리_이름} Makita 6093D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6093D 16 페이지. Equipped with electric brake 10 mm (3/8") with fast charger
Makita 6093D에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)
페이지 인쇄
• If youwish to charge twobattery c artridges, allow 15minutes between chargings
onthe
fast c harger.
Installing or removing drill bit or driver bit
CAUTION:
Always be sure that the tool is switched off and the battery
cartridge is removed before
installing or removing the bit.
To install
the bit,
place it in the chuck as
far as it will go. Tighten
the chuck
by hand.
Place the chuck
key
in each of the three
holes
and
tighten
clockwise.
Be sure
to
tighten
all three chuck
holes evenly.
To
remove
the
bit,
turn
the
chuck
key
counterclockwise
in just
one
hole,
then
loosen the chuck
by hand.
Chuck
key
After
use,
return
the
chuck
key
to the
storage cavity
on the tool.
Chuck
key
Holding
tool
Hold the tool
as shown
in the figure.
When
drilling
a large
diameter
hole,
hold
the tool
firmly
with
both
hands.