Makita 6095DW 사용 설명서 - 페이지 7

{카테고리_이름} Makita 6095DW에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6095DW 15 페이지. Cordless driver drill
Makita 6095DW에 대해서도 마찬가지입니다: 부품 목록 (3 페이지)

you

wish to charge two battery cartridges, allow 15 minutes between chargings on the

fast charger.

Installing or removing driver bit or drill bit

CAUTION :

Always

be sure that

the tool

switched

off

and the battery cartridge

removed before

installing or removing the bit.

Hold the ring and turn the sleeve counter-

clockwise to open the chuck jaws. Place

the bit in the chuck as far as it will go.

Hold the ring firmly and turn the sleeve

clockwise to tighten the chuck.

To remove the bit, hold the ring and turn

the

sleeve

counterclockwise.

Storage of driver bit

When not using the driver bit, keep

in the storage cavity on the tool.

Switch action

Tool speed is increased by increasing pres-

sure on the trigger. To start the tool,

simply pull the trigger. Release the trigger

to stop.

CAUTION :

Before inserting the battery cartridge into the tool, always check to

see

that the trigger

switch actuates properly and returns to the "OFF" position when released.