Makita 6096D 사용 설명서 - 페이지 9
{카테고리_이름} Makita 6096D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6096D 17 페이지. Cordless high speed drill equipped with electric brake
Makita 6096D에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지), 사용 설명서 (9 페이지), 사용 설명서 (13 페이지)
페이지 인쇄
1
1. Switch trigger
1
A
1. Reversing switch lever
ASSEMBLY
Switch action
002079
CAUTION:
•
Before inserting the battery cartridge into the tool,
always check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
Electric brake
This tool is equipped with an electric brake. If the tool consis-
tently fails to quickly stop after switch trigger release, have
tool serviced at a Makita service center.
Reversing switch action
002089
This tool has a reversing switch to change the direction of
rotation. Depress the reversing switch lever from the A side
for clockwise rotation or from the B side for counterclockwise
B
rotation.
When the reversing switch lever is in the neutral position, the
switch trigger cannot be pulled.
CAUTION:
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
•
When not operating the tool, always set the reversing
switch lever to the neutral position.
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.
9