Item
Worldwide
High Yield Toner Cartridge
Extra High Yield Toner Cartridge
1
This cartridge is supported only in MS810n and MS810dn printer models.
2
This cartridge is supported only in MS811n, MS811dn, MS812dn, and MS812ne printer models.
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name
Imaging unit
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
•
Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of
the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
•
Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser.
Notes:
•
Using certain types of paper may require more frequent replacement of the maintenance kit.
•
The separator roller, fuser, pick rollers, and transfer roller are all included in the maintenance kit and can be individually
ordered and replaced if necessary.
•
For more information on replacing the maintenance kit, see the instruction sheet that came with the supply.
Lexmark Return Program fuser maintenance kits and part numbers for MS810, MS811, and MS812
Lexmark Return Program
520Z
Fuser maintenance kit type
Type 00
Type 01
Type 02
Type 03
Type 04
Regular cartridge
1
520HA
2
520XA
Regular
520ZA
Part number
40X8420
40X8421
40X8422
40X8423
40X8424
Supplies Guide
Page 2 of 3
페이지 인쇄