Makita 6202DWG 사용 설명서 - 페이지 9

{카테고리_이름} Makita 6202DWG에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6202DWG 16 페이지. Cordless driver drill equipped with electric brake

Makita 6202DWG 사용 설명서
Switch action
I
Tool
speed is increased
by
increasing pres-
sure on the trigger. To start the tool, simply
pull the trigger. Release the trigger t o stop.
S w i t c h t r i g g e r 3 . p
'\\
CAUTION :
Before inserting the battery cartridge into the tool, always check t o see that the switch
trigger actuates properly and returns t o the "OFF" position when released.
Reversing switch action
This tool has a reversing switch t o change
the direction of rotation. Slide the revers-
ing switch t o the left for clockwise rota-
tion or to the right for counterclockwise.
CAUTION :
*Always check the direction of rotation before operation.
.Move the reversing switch only after the tool comes t o a complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
Speed change
To change the speed, slide the speed change
lever t o the "H" side for high speed or
"L"
side for low speed.
To slide the
speed change lever easily, pull the trigger
slightly while pushing the speed change
lever. Be sure that the speed change lever
is set
t o the correct position before opera-
tion. Use the right speed for your job.
CAUTION :
\
-
S p e e d
change lever
Always set the speed change lever fully into the correct position. If you operate the tool
with the speed change lever positioned halfways between the "H" side and "L" side, the
tool may be damaged.
9