Avaya IP OFFICE 2420 최종 사용자 설명서 - 페이지 6

{카테고리_이름} Avaya IP OFFICE 2420에 대한 최종 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya IP OFFICE 2420 19 페이지. Avaya ip office 2420 quick reference guide
Avaya IP OFFICE 2420에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (8 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (5 페이지), 빠른 참조 매뉴얼 (7 페이지), 사용자 설명서 (9 페이지), 빠른 참조 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 참조 매뉴얼 (4 페이지), 매뉴얼 (6 페이지), 설치 및 안전 지침 (17 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지)

identified by default labels a, b, c, etc., where a represents call appearance/feature button 1. The buttons in the right column run

from 5 through 8. If Call Center mode is enabled, call appearance/feature buttons 17 through 20 (identified by default labels q,

r, s, t ) are also displayed (with abbreviated labels) along the bottom of the screen.

When you receive or make calls, the available call identification information is displayed where the date and time appear when

the telephone is idle. For example, when you dial an extension, that number is shown and then replaced by the called party's

name and extension. The call identification information associated with an extension is provided by the call processing system.

When a call is received from another extension, the caller's name is shown; when a call is received from outside, the calling

number (if available), "OUTSIDE CALL," or a trunk identifier is shown.

One call appearance is underlined at all times. When a call arrives at the telephone, the bell icon blinks on the corresponding

call appearance, which is underlined. After you answer the call, the active call icon is displayed.

Note: If the call appearance is not displayed on the current Home screen page, use < or > to locate and answer the appropriate

call appearance.

The display remains in call handling mode until you activate one of the other softkey features. After using any of these features,

return to Page 1 of the Home Screen by pressing

The icons displayed on the call appearance/feature buttons of your telephone are explained in the following table. These icons

replace the functionality of the green LEDs and equivalent flash rates.

Status Icons

Icon

Ringing

Active

On hold

On soft hold

Feature active

Feature pending Your request is being processed but is not immediately available.

In addition, the following icons are displayed in certain feature-specific applications.

Status Icons

Definition

An incoming call is waiting to be answered.

The call you are currently handling.

A call currently on hold.

A call put on hold during a transfer or conference.

Feature on left side of the display currently is active.

Feature on right side of the display currently is active.

Status Icons for Feature-Specific Applications

Icon

Definition

Feature status Used by the Call Center Q Time feature.

Feature status Used by the Call Center Aux Work feature.

Feature status Used by the Call Center Service Observing feature.

2420 Digital Telephone End User Guide | 6 |

P a g e