Lexmark MS911 빠른 참조 매뉴얼 - 페이지 14
{카테고리_이름} Lexmark MS911에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS911 18 페이지.
페이지 인쇄
[x]‑page jam, press latch to access area G
and clear jammed staples. Leave paper in
bin. [402.93]
1
Remove all paper from the staple finisher bin.
2
Press the latch on the staple finisher, and then slide the finisher to
the left.
3
Remove the staple cartridge holder.
4
Use the metal tab to lift the staple guard, and then remove any
loose staples.
5
Press the staple guard down until it clicks into place.
14
6
Press the staples against the metal bracket.
Note: If the staples are at the rear of the cartridge, then shake
the cartridge downward to bring the staples near the metal
bracket.