Makita 6226DWE 사용 설명서 - 페이지 13

{카테고리_이름} Makita 6226DWE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6226DWE 19 페이지. 9.6 v i2 v 14.4 v
Makita 6226DWE에 대해서도 마찬가지입니다: 사용 설명서 (19 페이지), 사용 설명서 (19 페이지), 사용 설명서 (19 페이지)

페이지 인쇄

CAUTION:

*Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pres-

sure will only serve to damage the tip of your bit, decrease the tool performance and

shorten the service life of the tool.

*There is a tremendous force exerted on the tool/bit at the time of hole breakthrough.

Hold the tool firmly and exert care when the bit begins to break through the workpiece.

*A stuck bit can be removed simply by setting the reversing switch to reverse rotation in

order to back out. However, the tool may back out abruptly if you

not hold it

firmly.

*Always secure small workpieces in a vise or similar hold-down device.

*If the tool is operated continuously until the battery cartridge has discharged, allow the

tool to rest for 15 minutes before proceeding with a fresh battery.

Installing set plate

For 6226D & 6227D

Always install the set plate when using bat-

tery cartridges 9100, 9102, 9102A for

6226D and 1200, 1202, 1202A for 6227D.

Install the set plate on the tool with the

screw provided.

Screw