Ceyear 4024F 유지 관리 매뉴얼 - 페이지 9

{카테고리_이름} Ceyear 4024F에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ceyear 4024F 19 페이지. Spectrum analyzer

4.1 Removal Process

Remove the battery cover assembly (17), and then remove the battery (11).

Gently place the 4024 series spectrum analyzer on the table with back upwards, and remove eight

fixing screws (four on the back and four on the side) of the casing with a Phillips screwdriver.

Separate 4024 front casing from its rear casing (Attention: In this case, two parts of the casing are

connected by multiple cables, do not separate the casing forcibly). Firstly, remove one end of the

interconnecting cable between the front and rear casings, and then place them on the table. In case

of reassembly, pay attention to the relationship of the connection cables, as shown in the following

figure.

Fig. 2 Removal of Battery

Fig. 3 Removal of 6 Fixing Screws