Lexmark MX310 Series 매뉴얼 복사

{카테고리_이름} Lexmark MX310 Series에 대한 매뉴얼 복사을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MX310 Series 3 페이지. Monochrome laser multifunction printer
Lexmark MX310 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 팩스 매뉴얼 (3 페이지), 빠른 참조 매뉴얼 (17 페이지), 소모품 매뉴얼 (2 페이지), 정보 매뉴얼 (1 페이지), 설정 시트 (2 페이지), 사양 (2 페이지), 제품 사양 (2 페이지)

페이지 인쇄
Lexmark MX310 Series 매뉴얼 복사
Copy Guide
Note: You can load paper sizes in short‑edge‑first orientation. For more information, see the "Supported paper sizes, types,
and weights" section of the User's Guide.

Making a quick copy

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure the size of the original document and the size of the copy paper are the same.
3
From the printer control panel, press

Copying using the ADF

1
Load an original document faceup, short edge first into the ADF tray.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
Adjust the paper guides.
3
From the printer control panel, use the keypad to enter the number of copies, and then press

Copying using the scanner glass

1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the printer control panel, use the keypad to enter the number of copies, and then press
Note: If you want to scan another document, then place the next document on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
3
Press the left or right arrow button to scroll to Finish the Job, and then press

Understanding the copy options

Copies
This option lets you set the number of copies to be printed.
.
Copy Guide
Page 1 of 3
.
.
.
.