Lexmark MX310dn 빠른 참조 - 페이지 2
{카테고리_이름} Lexmark MX310dn에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MX310dn 16 페이지. Monochrome laser multifunction printer
Lexmark MX310dn에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 사양 (2 페이지), 제품 사양 (2 페이지)
Loading trays
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all other
trays closed until needed.
1
Pull out the tray completely.
Note: Do not remove trays while a job prints or while Busy
appears on the printer display. Doing so may cause a jam.
2
Squeeze and then slide the width guide tab to the correct position
for the size of the paper you are loading.
1
2
3
Squeeze and then slide the length guide tab to the correct position
for the size of the paper you are loading.
2
Notes:
•
For some paper sizes like letter, legal, and A4, squeeze and
slide the length guide tab backward to accommodate their
length.
•
When loading legal‑size paper, the length guide extends
beyond the base leaving the paper exposed to dust. To
protect the paper from dust, you can purchase a dust cover
separately. For more information, contact customer support.
•
If you are loading A6-size paper in the standard tray, then
squeeze and then slide the length guide tab toward the
center of the tray to the A6‑size position.
•
Make sure the width and length guides are aligned with the
paper size indicators on the bottom of the tray.
2
1
4
Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.