Makita 6280D 사용 설명서 - 페이지 8

{카테고리_이름} Makita 6280D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6280D 17 페이지. Makita cordless driver drill instruction manual 6260d, 6270d, 6280d

ASSEMBLY

1. Sleeve

2. Ring

3. Tighten

OPERATION

or a piece of duplicate material to determine which torque

level is required for a particular application.

NOTE:

•

The adjusting ring does not lock when the pointer is

positioned only halfway between the graduations.

•

Do not operate the tool with the adjusting ring set

between the number 16 and the

may be damaged.

CAUTION:

•

Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out any

work on the tool.

Installing or removing driver bit or drill bit

005222

Hold the ring and turn the sleeve counterclockwise to open

the chuck jaws. Place the bit in the chuck as far as it will go.

Hold the ring firmly and turn the sleeve clockwise to tighten

the chuck.

To remove the bit, hold the ring and turn the sleeve counter-

clockwise.

005223

Place the point of the driver bit in the screw head and apply

pressure to the tool. Start the tool slowly and then increase

the speed gradually. Release the switch trigger as soon as

the clutch cuts in.

CAUTION:

•

Make sure that the driver bit is inserted straight in the

screw head, or the screw and/or bit may be damaged.

NOTE:

•

When driving wood screws, predrill pilot holes to make

driving easier and to prevent splitting of the workpiece.

See the chart.

marking. The tool