Makita 6305 사용 설명서 - 페이지 2

{카테고리_이름} Makita 6305에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6305 9 페이지. 13mm (1/2")
Makita 6305에 대해서도 마찬가지입니다: 사양 (2 페이지), 기술 정보 (8 페이지)

페이지 인쇄

SPECIFICATIONS

Capacities

No load speed (min

Overall length

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for drilling in wood, metal and

plastic.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (L

Sound power level (L

Uncertainty (K) : 3 dB (A)

Wear ear protection

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Work mode: drilling into metal

Vibration emission (a

Uncertainty (K) : 1.5 m/s

Model

Steel

Wood

-1

)

Net weight

Safety class

) : 84 dB (A)

) : 95 dB (A)

) : 2.5 m/s

or less

h,D

NOTE: The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration emission value may

also be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufac-

turer declare that the following Makita machine(s):

Designation of Machine:

Drill

Model No./ Type: 6305

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd.

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

2 ENGLISH

6305

13 mm

30 mm

1,450

346 mm

2.8 kg

/II

30.1.2009

Tomoyasu Kato

Director