Lexmark MX610 Series 기술 노트

{카테고리_이름} Lexmark MX610 Series에 대한 기술 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MX610 Series 3 페이지. Information guide
Lexmark MX610 Series에 대해서도 마찬가지입니다: 이메일 매뉴얼 (4 페이지), 팩스 매뉴얼 (4 페이지), 매뉴얼 복사 (3 페이지), Ftp 매뉴얼 (3 페이지), 소모품 매뉴얼 (3 페이지), 정보 매뉴얼 (1 페이지)

페이지 인쇄
Lexmark MX610 Series 기술 노트
Using your printer driver:
creating custom forms
The ability to associate a friendly name with a
group of frequently used, personalized
document settings can be a welcome
timesaver in your printing environment. The
Custom forms feature allows administrators
to save a uniquely-named collection of
document settings that may include:
•
paper size.
•
paper type.
•
watermark selections.
•
overlay selections.
•
position and placement of watermark
items on the printed page.
•
position and placement of overlay
items.
This feature lets you configure your custom
form once and then make it available for
selection, editing, or deletion with the press of
a button. This way, you don't have to manually
select your desired settings every time you
want to use them.
For example, if you print a daily report that
requires a particular paper size, an overlay,
and a watermark, you can make the
appropriate paper size, overlay, and
watermark selections (if supported by your
printer driver's datastream; this will be
covered in a subsequent section) and
associate those settings with a name such as
My_Report. When you select My_Report
from the Paper size drop-down list on the
Paper tab, the configuration you set up is
used when the document prints.
Let's take a look at the individual steps you
need to take in order to configure, save, and
select a custom form for printing. These
methods differ slightly between the PostScript
emulation and PCL emulation driver
datastreams, so they will be listed separately.
Tech
Note

Creating a custom form

using the PCL emulation
driver
In Windows 2000, Windows XP, and Windows
Server 2003, you must be an administrator to
access this feature. To access this feature,
you must open the Printers folder to begin:
1
Open the Printers folder by clicking
Start à à à à Settings à à à à Printers.
2
Right-click the printer object, and select
Properties.
3
Click the Forms tab. (See Figure 1.)
4
Click the New... button from the Custom
forms options to display the New Custom
Form dialog box. (See Figure 2 on the
next page.)
5
Enter a name for the new form in the
Custom form name field.
March 2004
Figure 1