A&E DC1800 매뉴얼 - 페이지 4

{카테고리_이름} A&E DC1800에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A&E DC1800 5 페이지.

Additional function

When set in each time interval between different press buttons less than 6 sec, otherwise it will restore the

original state. NOTE: repeat setting, function is cancelled.

Automated motion

Step 1: Press 1x the P2 button on the handset (LED flashing)

Step 2: Press 1x the Up button on the handset (LED flashing)

Step 3: Press 1x the P2 button on the handset (LED flashing)

The controlled motion has been changed to an automated motion. It can be controlled by pressing the Up or

Down button once Up or once Down and the movement will set automatically.

Additional function

When set in each time interval between different press buttons less than 6 sec, otherwise it will restore the

original state. NOTE: handset A is the one already matched, while handset B is not.

Add Emitter

Step 1: Press 1x the P2 button on the handset A (LED flashing)

Step 2: Press 1x the P2 button on the handset A (LED flashing)

Step 3: Press 1x the P2 button on the handset B (LED flashing)

The additional handset B has been added and can be controlled in the same way as the original handset A.

Additional function

When set in each time interval between different press buttons less than 6 sec, otherwise it will restore the

original state. NOTE: Delete all handset channels, restore the factory settings.

Delete all the handsets

Step 1: Press 1x the P2 button on the handset (LED flashing)

Step 2: Press 1x the Stop button on the handset (LED flashing)

Step 3: Press 1x the P2 button on the handset (LED flashing)

All the handsets have been deleted and restored to the factory settings.

A&E Trading b.v. - Lineaire aandrijftechniek