A&I Products A-C7481B 설치 매뉴얼 - 페이지 7

{카테고리_이름} A&I Products A-C7481B에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A&I Products A-C7481B 7 페이지.

The top bracket will attach to the canopy frame using (4) 3/8" bolts. There are multiple positions to attach

the brackets to the canopy frame, this is determined by the angle of the ROPS and personal preference. If the

ROPS angles forward, use holes towards the center of the canopy frame. If the ROPS angles to the rear, use

holes towards the rear of the canopy frame.

Fig. 3

Mount the canopy assembly to the ROPS using (4) 1/2" u-bolts, (4) 1/2" washers, and (4) 1/2" lock nuts.

Please note that your kit is provided with 2 different size u-bolts to accommodate 2 1/2" - 3" ROPS, use

the best fitting for your application. Insert the u-bolts around the ROPS frame and into the side frames of the

ROPS. Once all u-bolts are in place, level the ROPS and secure the nuts.

Fig. 5

Revised

7/18/18