Alienware X51 R2 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Alienware X51 R2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alienware X51 R2 18 페이지. Quick start guide
Alienware X51 R2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

System Setup

Overview

Use the system setup to:

•

get information about the hardware installed in your computer, such as the amount

of RAM, the size of the hard drive, and so on

•

change the system configuration information

•

set or change a user-selectable option, such as user password, type of hard drive

installed, enabling or disabling base devices, and so on

CAUTION:

the settings for this program. Certain changes can make your

computer work incorrectly.

NOTE:

Before you change system setup, it is recommended that you note the

system-setup screen information for future reference.

Entering System Setup

Turn on (or restart) your computer.

During POST, when the Alienware logo is displayed, watch for the F2 prompt to

appear and then press <F2> immediately.

NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt

can appear very quickly, so you must watch for it, and then press <F2>. If you

press <F2> before the F2 prompt, this keystroke is lost. If you wait too long and

the operating system logo appears, continue to wait until you see the Microsoft

Windows desktop. Then, turn off your computer and try again. See "Turn Off Your

Computer and Connected Devices" on page 7.

System Setup Screens

The system setup screen displays current or changeable configuration information for

your computer. Information on the screen is divided into three areas: the Setup Item,

active Help Screen, and Key Functions.

System Setup

Unless you are an expert computer user, do not change