A&S Studio Bar 100 사용자 설명서 - 페이지 8

{카테고리_이름} A&S Studio Bar 100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A&S Studio Bar 100 14 페이지.

Preparations

The Remote Control allows the unit to be operated from a distance.

•

Even if the Remote Control is operated within the effective range 6m, remote control operations

may be disrupted if there are any obstacles between the unit and the remote control.

•

If the Remote Control is operated near other products that generate infrared rays, or if other

remote control devices using infrared rays are used near the unit, it may operate incorrectly.

Conversely, the other products may operate incorrectly.

First-time use

The unit has a pre-installed lithium CR2025 battery. Remove the protective tab

to activate the remote control battery.

1 Pull out the battery tray and remove the old battery.

2 Place a new CR2025 battery into the battery tray

with correct polarity (+/-) as indicated.

3 Insert the battery tray back into the slot.

Precautions Concerning Batteries

•

When the Remote Control is not to be used for a

long time (more than a month), remove the battery from the Remote Control to prevent it from

leaking.

•

If the batteries leak, wipe away the leakage inside the battery compartment and replace the

batteries with new ones.

•

Do not use any batteries other than those specified.

•

Do not heat or disassemble batteries.

•

Keep away from heat or moisture.

•

Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short

circuit, leak or explode.

•

Never recharge a battery unless it is confirmed to be a rechargeable type.

A If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand,

centered with the TV screen.

B If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.

Option - A

Option - B

- 6 -