Align APS-M 펌웨어 업데이트 - 페이지 8

{카테고리_이름} Align APS-M에 대한 펌웨어 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Align APS-M 14 페이지. Multicopter control unit

10. Please scan the QR Code for relative update systems, or please search for "ALIGN AP1"

in iOS/Android App store.

Start AP1 interface, click Wi-Fi connection, confirm and complete transmitter binding process.

Enter to Ground Station System/Receiver Type/Choose the receive type. Here is the default

settings : ALIGN A.BUS for A13 GST transmitter.

請掃描 QR Code 連結亞拓網站下載相關軟體，或是在 iOS/Android App store 搜尋"ALIGN

AP1"。

開啟 AP1 介面，進行 Wi-Fi 連線後，確認遙控器對頻完成，點選〔進入地面站介面〕將直接進

入地面站頁面。最後進入〔接收器類型〕選擇所使用接收器類型。A13 GST 遙控器內建 ALIGN

A.BUS。

After finish connection, please do preflight inspection exactly. System shows current Multicopter status and

equipment selected, make sure to double check all devices are used in safe range and selected correctly.

連線後應確實做好飛行前檢測。系統顯示目前飛行機狀態及設備選擇的項目，務必再次確定設置在安全使用範圍、

且飛行設備選擇正確。