Align-Pilates M2-Pro Reformer 조립 지침 및 사용자 설명서 - 페이지 10

{카테고리_이름} Align-Pilates M2-Pro Reformer에 대한 조립 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Align-Pilates M2-Pro Reformer 12 페이지. Reformer

페이지 인쇄

m 2 - P r o

e x P l o r e d

Patented Silent Pulleys

•

Available extras: Half Cadillac, Mattress Converter, Jump Board, Standing Platform and Neck Pillow.

Exploded diagrams:

Note: For larger images of the exploded diagrams and a detailed parts list please download from:

pilates.com/pilates-equipment-resources/

ESSENTIAL SAFETY & MAINTENANCE INFORMATION (read before use)

Periodic Maintenance

Please check the apparatus before first use and after each of the first few uses to check all the fittings are securely

fastened. Thereafter, it is important to follow a regular maintenance schedule by someone familiar with the

equipment and record your maintenance checks. Equally, inspection should be made immediately if any part

appears not be operating correctly or something appears to be loose. Below follows a basic maintenance guide

though our detailed maintenance guide and a sample maintenance log can be downloaded from

mad-hq.com/align-pilates-resources

• Springs - Inspect for signs of wear, look for deformation, kinks, gaps and corrosion. Springs showing signs of

damage must not be used and must be replaced immediately. Springs must be replaced every 2 years or after

3,000 hours, whichever is first, or immediately if showing signs of fatigue or deformation

• Footbar - Check all allen bolts securing the padded bar to the aluminium arms and to the footbar selector rod

and through the frame are tight, but be careful not to over tighten.

• Runners - Ensure the runners are regularly cleaned and kept free from dirt as this is the main cause for a noisy

reformer. If excess dirt is spotted on the runners then the wheels may also need cleaning. We recommend

cleaning the runners with gym wipes by vital-clean.de, as recommended below for upholstery.

• Ropes and Handles - Check ropes for signs of wear, fraying or nicks and replace if damaged. Check stitching on

handles and silent foot strap is intact and handles are not overly worn.

• PVC Upholstery - Always ensure belts, jewellery and shoes are removed when working on the equipment as

buckles, rings, watches and bangles can all end up damaging the upholstery. For cleaning upholstery we

recommend cleaning with gym wipes from vital-clean.de, which are available worldwide. For further

information on cleaning recommendations see the link above.

• Wheels - Remove the carriage and check for smooth rotation, if the wheels are not turning smoothly or are

scarred or damaged this will impede smooth and quiet running of the equipment and the wheels will need to

be replaced. Check side wheels are adjusted correctly if squeaking is experienced - see page 6 for guideance.

• Shoulder Rests - Check the pads are securely bolted on to the metal frame - if loose retighten.

• Spring hooks - Hand check all eye hooks will not move. If loose remove, apply loctite and retighten. Check the

spring retention bungee is correctly attached underneath the carriage.

• Nuts & Allen Bolts - Check all nuts and bolts are tight, including those on the rope pulley wheels and those

securing the head rest and Half Cadillac if attached.

Silent rope & double loop handles

•

(with no metal hardware)

Single adjustment rope length system

•

changes rope lengths simultaneously

104cm of carriage travel

Removable & lockable shoulder rests

•

3 position

head rest

North American Solid

•

Maple Frame

4 position spring bar

•

5 nickel plated music

•

wire springs in

3 strengths

Lockable foot bar

•

https://align-

4 position foot bar

•

including down

Removeable

•

standing platform

https://www.