AEG 6000 Series 사용자 설명서 - 페이지 11

{카테고리_이름} AEG 6000 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 6000 Series 24 페이지.
AEG 6000 Series에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 사용자 설명서 (24 페이지), 사용자 설명서 (24 페이지)

페이지 인쇄

The wires in the cord are coloured as

follows:

Green and yellow

Blue

Brown

WARNING!

A cut off plug inserted into a

13 amp socket is a serious

shock hazard. Ensure that

the cut off plug is disposed

of safely.

3.7 Replacement of the

connection cable

The replacement of electric

cable must be carried out

exclusively by the service

force centre or by personnel

with similar competencies, in

accordance with the current

regulations.

To replace the connection

cable use only H03V2V2-F

T90 or equivalent type.

Make sure that the cable

section is applicable to the

voltage load and the

working temperature. The

yellow/green earth wire (B)

must be approximately 2 cm

longer than the live and

neutral wire (A).

1. Connect the green and yellow (earth)

wire to the terminal which is marked

with the letter 'E', or the earth

- Earth

- Neutral

- Live

symbol

, or coloured green and

yellow.

2. Connect the blue (neutral) wire to the

terminal which is marked with the

letter 'N' or coloured blue.

3. Connect the brown (live) wire to the

terminal which is marked with the

letter 'L'. It must always be

connected to the network phase.

There must be no cut or stray strands

of wire present. The cord clamp must

be correctly attached to the outer

sheath.

3.8 Assembly

min. 600 mm

min. 150 mm

min. 55 mm

30 mm

ENGLISH

min. 650 mm

560 mm