AEG 8000 Series 사용자 설명서 - 페이지 26

{카테고리_이름} AEG 8000 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 8000 Series 32 페이지.

Components

Description

The lamp is burnt out.

Power cut always stops cleaning. Repeat

cleaning if it's interrupted by power failure.

12.2 How to manage: Error codes

When the software error occurs, the display shows error message.

In this section, you will find the list of the problems that you can handle on your own.

Code and description

C2 - the Food sensor is in the appliance cavity during

Pyrolytic Cleaning.

C3 - the door is not fully closed during Pyrolytic Clean‐

ing.

F111 - Food sensor is not correctly inserted into the

socket.

F240, F439 - the touch fields on the display do not

work properly.

F908 - the appliance system cannot connect with the

control panel.

12.3 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised

Service Centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.

We recommend that you write the data here:

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

ENGLISH

Remedy

Replace the lamp, for details refer to "Care and Clean‐

ing" chapter, How to replace: Lamp.

Remedy

Take out the Food sensor.

Close the door.

Fully plug Food sensor into the socket.

Clean the surface of the display. Make sure there is no

dirt on the touch fields.

Turn the appliance off and on.

.........................................