Alinco DR-135 딜러 매뉴얼 - 페이지 4

{카테고리_이름} Alinco DR-135에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alinco DR-135 20 페이지. Vhf fm mobile transceiver

2. Configuring the Transceiver

as a Channel-Indication-Mode Unit

You can set the transceiver in the Channel Indication mode either by:

• Setting the pad (BP4) on the printed circuit board of the transceiver

(see "2.1 Setting Up the Transceiver with the Pad BP4"); OR

• Using the DR-135 Channel Data Editor (see "2.2 Setting Up the

Transceiver with the Data Editor").

The CH Data Editor is useful when you want to set up two or more transceivers.

When the transceiver is in the Channel Indication mode, the LCD will look like

the following:

When the Channel contains data:

Note:

• The following parameters can be configured with the CH Data Editor:

Enabling/Disabling the SCAN start when the channel is to be

skipped.

Enabling/Disabling power change

Enabling/Disabling the key-lock

Enabling/Disabling MONI key

Enabling/Disabling CTCSS/DCS key

Enabling/Disabling Tone Burst output

• When the above operations are enabled and set, the setting contents

are displayed.