Alinco DR-510T 사용 설명서 - 페이지 3
{카테고리_이름} Alinco DR-510T에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alinco DR-510T 16 페이지. Vhf/uhf dual band fm transceiver
Alinco DR-510T에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)
페이지 인쇄SPECiFICATIONS
General
Frequency Coverage
144.0~148.0MH2(DR-510T)
440.0-450.0 MHz
144.0-146.0 MHz (DR-510E)
430.0-440.0 MHz
Antenna Impedance
50 ohms unbalanced
Power Supply
Requirement
13.8 Volts D.C.
Current Drain all 3.8 V — Receiving
Squelched: does not exceed 500 mA
Transmitting
High: 45 W approx. 9.5 A at VHF
35 W approx. 10 A at UHF
Lew: 5 W approx. 4 A at VHF
5 W approx. 4 A at UHF
Dimension
140 mm (W) x 50 mm (H) x205 mm (D)
(5y2"x2"x8yi6")
Weight
Approx. 1.7 kgs. (3.75 ibs.)
Transmitter
Output Power
High; 45 Watts at VHF, 35 Watts at UHF
Low; Approx. 5 Watts at both bands
Emission Mode
16F3
Modulation System
Variable Reactance F.M.
Max. Frequency Deviation .. ±5 kHz
Spurious Emission
More than 60 dB below carrier
Microphone
Electret Condenser Microphone
Operating Mode
Simplex
Duplex: ±600 kHz from receive frequency at VHF
: ±5,1.6,7.6 MHz from receive frequency at UHF
(Odd Offsets programmable)
DTMF Encoder
Built-In
Recelver
Receiving System
Superhetrodyne, dual conversion
Modulation Acceptance — 16F3
Intermediate Frequency
Ist 10.7 MHz 2nd 455 kHz at VHF
Ist 30.825 MHz 2nd 455 kHz at UHF
Sensitivity
12 dB SINAD less than 0.16 pV
Selectivity
More than ±6 kHz at -6 dB
Less than ± 12 kHz at -60 dB
Audio Power Output
More than 1.5 Watts (8 ohms-10% Distortion)
Speaker Impedance
8 ohms
- 3 -